Segment fittings are designed to use for the construction of water and gas distribution systems and pressure sewer systems.
The fittings are connected with pipes using the following the following methods:
- butt fusion welding
- using electrofusion fittings
Rated pressure:
- segment bends PE 100 SDR 17 - PN 10; reduction factor 0,8
- segment bends PE 100 SDR 11 - PN 16; reduction factor 0,8
- segments tees PE 100 SDR 17 - PN 10; reduction factor 0,65
- segments tees PE 100 SDR 11 - PN 16; reduction factor 0,65
Material:
- polyethylene HDPE 100
- polyethylene HDPE 80
